⟁ Nevada Well Data field records · 2026 survey

Nevada Well Data › Nye County › Beatty (89003)

Beatty, NV (89003): well depth, water level & drilling cost

✓ 250 NDWR records · Nye County

325 ftmedian well depth
75 ft–683 fttypical depth range
295 ftmedian static water level
35 gpmmedian yield (29 tests)

Pull every recorded well near a Beatty (89003) address — $49

How deep are wells in and around Beatty (89003), Nevada?

The median drilled well depth in and around Beatty (89003) is 325 ft, based on 242 wells with recorded depths in the state NDWR database. Half fall between 75 ft and 683 ft; 90% are shallower than 1,402 ft.

How much does it cost to drill a well in and around Beatty (89003)?

Applying published per-foot rates to the local median depth of 325 ft: drilling and casing alone typically runs $8,125–$21,125; a complete system including pump, pressure tank, and hookup typically runs $19,500–$32,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Beatty (89003)?

The median static water level is 295 ft below ground surface (middle half of wells: 20 ft–420 ft), from 189 measurements.

Drilled depth distribution

0–50 ft 54 50–100 ft 12 100–150 ft 18 150–200 ft 14 200–300 ft 10 300–400 ft 46 400–600 ft 21 600+ ft 67
Looking at a specific property in Beatty (89003)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Beatty (89003)

Free. Goes to licensed drillers working Nye County.

Part of Nye County well records.

Method: medians computed from NDWR records (filed well driller reports from the Nevada Division of Water Resources; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.